fbpx

DAEIL SYSTEMS

DAEIL SYSTEMS

Thermo Fisher Scientific Spectra 200 TEM
DVIA-MB3000 Installation Report

Installation Reports

Confidential

• Executive Summary

Introduction

The purpose of this work is to install the Vibration Isolation MB3000 system for the Thermo Fisher Scientific Spectra 200 in , Spectra Room.

Summary Results

Below is a summary of the results:

  • MB3000 ON PASSED the Vibration specifications

• Introduction

The purpose of this work is to install the Vibration Isolation MB3000 system for the Thermo Fisher Scientific Spectra 200 in , Spectra Room.

• Product Details

Part Delivered Serial Number Software
MB3000 220542R2 Site-Specific Tune

• Summary of Work

We installed the system by

  • Leveling the daeil to within .5mm
  • Connecting the seismic restrains between the daeil and the tool

 

We tested the system by

  • Collecting vibration data to verify the performance

 

We left the system

  • In position and off

• Installer's Notes

• Procedures

Vibration

VEC conducted vibration measurements in six directions.
Acceleration measurements were taken at a bandwidth of 200 with units of m/s (RMS). The acceleration spectra with 200 bandwidths were recorded.

• Setup

Vibration
Bandwidth 200
Lines 3200
Window Hanning
Coupling ICP 2mA
Average Type Stable
Duration 60
Engineering Units um/s (RMS)

• Specifications

VEC used the following specifications for the project.

Specification Summary

Tool Specification
Thermo Fisher Scientific Spectra 200 Vibration
 VC-F
  All Directions
   VC-G

Detailed Specifications

• Results

Summary Results

Below is a summary of the results:

  • MB3000 PASSED the Vibration specifications
 

Detailed Results

Type Position Direction Specification Measurement Result
Vibration Floor Z-Axis VC-G VC-E FAIL
X-Axis VC-G PASS
Y-Axis VC-F FAIL
MB3000 Z-Axis VC-G PASS
X-Axis VC-G PASS
Y-Axis VC-G PASS

• Data

Spectra Room - Thermo Fisher Scientific Spectra 200

Vibration

Figure 1: Z-Axis – Floor

Figure 2: Z-Axis – MB 3000r

Figure 3: Z-Axis – Transmissibility

Figure 4: X-Axis – Floor

Figure 5: X-Axis – MB 3000

Figure 6: X-Axis – Transmissibility

Figure 7: Y-Axis – Floor

Figure 8: Y-Axis – MB 30000

Figure 9: Y-Axis – Transmissibility

Figure 10: Final Result